Product Description
Siligum 2 part silicone moulding compound.
To use, mix equal parts of the two colours until they become one even colour. Press onto the texture or shape you want to capture. Let cure for about 5 minutes. When you can press a finger nail into the compound without it leaving a mark, it is ready to de-mould. Let rest for about 5-10 minutes before use.
Siligum will produce an absolute minimum of 50 casts (used with metal clay it seems to last forever) and can be used with metal clay, polymer clay, plaster, resin, and even low melting metals and waxes.
Use within 12 months of purchase.
100g will cover approximately 150 x 150mm.
100gm which comes as 2 x 50gm pots.
Product Videos
Custom Field
Product Reviews
13 Reviews
-
SILIGUM MOULDING COMPOUND - 100G
Great product! Easy to use and good results.
-
Perfect
Perfect
-
Excellent detail captured
Silgum is very easy to used and captures details very well.
-
Moulding compound
Great product. Very good moulds with good defenition. 100g is a good size for "on the go".
-
Siligum
Make sure you have all the things to hand that you want to mould. Half or quarter each colour & use in small quantities as it really does go off quickly so you have to work fast once the two elements are mixed. That said I love this stuff, you can mould so many different kinds of things to ensure your creations are truly your own :)
-
easy to use with excellent resukts
I have only used the siligum onc so far but I was able the make a very details mould of a pendant so that I can now male PMC versions of it. Really please with the product, very easy to use and produced an excellent result. Definitely recommend siligum.
-
this is expensive but it certainly does the job
There is no doubt that this does what it says on the tin. It is clean and odour free. It is expensive so go carefully until you've had some practice as I wrote off quite a lot!
-
Quick and simple
Pull similar sized piece from each pot, mix till the colour is even and use! It doesn't get much easier. The fresh mix is so soft it picks up all the details - watch out when casting twigs, the bits of bark can become part of the mould! When it is set, you do not need to use oil, just press your clay in there and let it dry - it shrinks a little and falls out quite easily (as long as you didn't make your imprint too deep)!
-
Pure Dead Brilliant!!!
Love this stuff. I use if for polymer and metal clays. You need this in your life :-)
-
Very easy to use
Brilliant product. I use it to metal clay. You have to let it set for about 40 seconds to get better results specially for fingerprints.
-
Amazing
Bought this for Sliver Clay but have also used it for polymer clay. I have became a moulds addict. Excellent product easy to use, no mess & captures alot of detail.
-
Brilliant Stuff!
Have made more moulds than I will probably ever use (Be warned, its addictive) but those I have used are great. It picks up fine detail well and is flexible enough to get the clay out of easily. Just the one disaster, it reacted badly with a rubber stamp I tried to take a mould of (had worked fine with same brand of stamps previously) so best to test a little bit before you ruin a stamp like I did.
