Product Description
REFURBISHED Prometheus Pre-Programmed Mini Kiln PRO-1 PRG - SAVE UP TO A WHOPPING £135 (30%)!
If you're not looking for a refurbished kiln you can find our new stock here.
This is the upgraded version of the Prometheus PRO1 MiniKiln. This kiln is programmable, making it a brilliant little kiln suitable for both personal and professional use.
It is perfect for small-scale work in Art Clay, PMC, and other silver and base metal clays, as well as enamelling. It can also be used for little beads of low fire ceramics, china painting, annealing and hardening silver and gold, and small glass fusing, like making dichroic glass cabochons and other small items.
It's a 1000°C front-loading kiln, with a built-in, easy-to-use, 3-key digital programmable controller.
*We are sorry - due to poor handling by couriers we are not shipping kilns outside UK mainland at this time.
Using the programmable controller you simply choose one of the preset programmes, or create your own. When you do your own, you simply set 3 parameters:
- what temperature you want the kiln to fire at (target temperature)
- how fast you want it to heat up (ramp speed), and
- how long you want it to hold at the firing temperature (hold/soak time).
The kiln will turn the heating off once it has completed the programme. If you wish, you can also say how slow it should cool down, and if it should hold at a temperature whilst cooling down.
You get 11 pre-set and 4 blank programmes to set as you wish, each programme can have up to 5 segments. A segment could be like this: heat up at 300° C per hour, until you get to 650°C, then hold that temperature for 45 minutes. * PLEASE NOTE THAT THE REFURBISHED KILNS MAY NOT BE PRE-PROGRAMMED. But this is easy to do yourself!
To be able to set several segments with different heating speeds and temperatures are very useful if you're firing base metals, like copper and bronze (where you want to heat up slower and hold steady to burn the binder out at a lower temperature before the full firing at a higher temperature), or doing glass fusing (which needs a slow heating, and a slow cool down, with a soak/hold at a low temperature to anneal the glass once fused). A good thing with programmes is that you only set them once, and they will stay there until you change them.
This kiln has a Orton AutoFire Express Digital Programmable Temperature Controller (very similar to the one on Paragon, Sierra, and Evenheat kilns).
Please note that you will need a fibre shelf for this kiln - it does not come with a shelf.
The hole in the door of your kiln is for ventilation purposes and is supposed to be there. Don't plug the hole closed. If you use it as a peep hole you could damage your eyes unless you wear suitable eye protection.
The plate around the hole, as well as the area around the door of the kiln, can show discolouration with use and this is completely normal.
This kiln is rated at 700W (which means it uses less electricity than most plug-in heaters), and plugs into a regular mains socket with a 3pin UK plug. It's small enough to use in your home, school, craft work shop, or jewellery studio. It is ideal to take with you to craft events and workshops; it weighs less than 6kg and is small enough to carry.
This kiln is sometimes referred to as Creative Metal Clay Kiln, CMC Kiln, or MiniKiln with digital programmer.
Includes a 3 month limited warranty with Metal Clay Ltd.
SIZE
The outer steel case measures 225mm x 240mm x 295mm, and is slotted for air circulation, so it keeps cool. The door opens 90°, and there's a small door vent. It is normal for the metal above this vent and sometimes the door to discolour slightly with use.
The ceramic firing chamber, enclosed in an inner steel case, measures 115mm x 135mm x 70mm internally, and heats from the top, sides and bottom, with the fast-firing elements safely embedded in the ceramic.
TECHNICAL SPECIFICATIONS
| Volt | 230V |
| Amps | 3A |
| Watt | 700W |
| Max temp | 1000°C |
| Heating elements | 4; top, bottom and 2 sides |
| External size in mm | 225 x 240 x 295 (WxDxH) |
| Chamber size in mm | 115 x 135 x 70 (WxDxH) |
| Weight | 6kg |
| Programmes | 11 preset / 4 blank |
Quick explanation of some kiln lingo:
Target temperature: the temperature you want your kiln to heat up to (or cool down to), i.e. the temperature you need to fire your material at.
Digital controller: how you tell your kiln what to do. With a digital controller you press buttons. Older (or simpler) kilns sometimes just have a rotary controller which you turn until you're happy with the temp. - digital controllers are much easier to control.
Ramp function: a function which allows you to tell the kiln how fast (or slow) it should heat up/cool down. Mostly used in glass fusing and for some base metal clay firings, or for other materials which needs heating and/or cooling under more controlled conditions.
Ramp speed: the speed at which the kiln heats up, or cools down.
Hold time: how long your kiln should hold the target temperature. E.g., fire at 650°C for 30 minutes - 30 minutes is the hold time. Also called Soak, or Soak time.
Firing chamber: the inside of your kiln, where you place your things to be fired.
Kiln shelf: a small shelf on which you fire things. Never fire direct on the kiln floor.
