Product Description
Pam East Mysterious Southwest Mould, create beautiful jewellery with these tiny Jurassic themed shapes!
This mould includes tiny dinosaurs, swallows, geckos, moons, stars, cactuses and buffalos. You can mould these shapes using metal clay, polymer clay and other moulding clays, and even resin! The single-sided 3D pattern makes these moulds great for adding decoration and embellishments to your designs! Have a look at the second image for Pam's wonderful swallow pendant. The detail created from these moulds enhances your designs and with 38 shapes included we think this mould is a staple for any metal clay mould collection!
MEASUREMENTS:
Mould: 75 x 75 x 12mm approx.
Shapes range from: 4 x 4mm to 13 x 15mm.
To use:
- Fill the mould with wet metal clay, ensure the clay is pushed in all the way down into the shape. Silicone moulds generally don't need any non-stick solution, however we always recommend using a little to make de-moulding easier. You can use CoolSlip, Badger Balm or Slik Baby before placing on the clay to avoid sticking.
- Leave to dry in the mould. Be patient with the drying! It takes longer than you think to dry in the mould, as the heat only gets in from the top. If you try to pull them out too soon, you'll wreck or distort the shape. We recommend drying for over 24 hours in a warm dry room. You can speed it up by putting the mould in a dehydrator.
- Once dry, gently push the pieces out of the mould.