Product Description
Foredom's Chisel Handpiece - a powerhouse when it comes to carving! This clever handpiece changes the flexshaft's rotary movement to a reciprocating one, powering chisels and gouges allowing you to carve wood, plastic, resin, and plaster effortlessly.
As all Foredom's products, this handpiece is beautifully made, with a tough contoured body shape, rugged plastic barrel and tapered aluminum ends. Inside is a simple cam mechanism which is easily accessible for maintenance.
The Foredom H50 power chisel attaches to any flex shaft machine with a standard key tip shaft. It lets you do intricate carving work with almost no effort. Very little pressure is needed to remove even large volumes of wood when using a gouge chisel tool.
Works great with:
- Foredom TX motors
- Foredom LX motors
- Foredom SR motors (make sure you use it in forward rotation only!)
- JoolTool Flexshaft
IMPORTANT - Only use this in a FORWARD rotation, do not use in REVERSE otherwise the handpiece may sieze.
For optimal results and to give you a good tool life, use this handpiece between 3,000-10,000 rpm.
Handpiece specifications: 6" long, 1" in diameter, weight: 4.6 oz.
IMPORTANT
- After every 200 hours of use you should clean and lubricate this handpiece. The old grease must be cleaned off of the interior cam chamber and replaced with new lubricant. Replacement lubricant can be ordered here. Follow the instructions that came with your handpiece or click on the link for step by step maintenance instructions.
- Using the chisel handpiece with a dial speed control is easier and gives you more control than a foot operated control.
- Do not use over 18,000 rpm.
- Only use in a forward motor direction.
If you would like to purchase the chisels with this handpiece you can do so here.
