Product Description
25ml Efcolor Cold Enamel, easy-to-use enamel powders!
Efcolor enamel powders are fired at just 150ºC, so there is no need for a specialist kiln. They can be baked in your home oven, or use the specially designed Efcolor Tea Light Stove (if you have a fan assisted oven you might need to check where you place your pieces, so that the fan doesn't blow the powder off before it has had a chance to set).
Efcolor can be used on a wide range of surfaces including wood, porcelain, glass, silver, copper, bronze, brass, stone, ceramic or any other surface that can be fired at 150ºC... including our great range of copper blanks which can be found here.
You can get some great effects by sifting through stencils or shapes, or by adding elements to the powder and then baking in place. We recommend you get a sifter/sieve top to make it easier to spread the colour over your surface. You will not receive any instructions with this product, however please use the below for reference:
1. Sift your powder onto your chosen backing.
2. Move onto your firing plate.
3. Insert into an oven that is pre-heated to 150ºC.
4. Remove after 3–5 minutes (be careful, it will be hot).
5. If you are doing the back, then just repeat the above, but don't lay it colour down onto your firing plate, as the colour will melt again. For double-sided firing, use a firing stand (trivet). If you have the Efcolor Tea Light Stove Set, it includes with a trivet.
Product Videos
Videos Hide Videos Show Videos
Custom Field
Product Reviews
2 Reviews
-
Efcolour clear
This is a wonderful product - I have been using it with great success for a while now. I am super impressed with the efficiency and customer sercice I have received too. The delivery was speedy - all the way to Oz and despite Covid! Thanks Metalclay team.x
-
clear colour
Wanted this as a gloss clear finish. It has an opaque finish where it is slightly thicker.
