Product Description
Bezel Builder - Teardrop 5x7mm
Easily create accurate, neat, and professional clay bezels for setting stones!
Start by pressing the clay into the mould, and compress with a vice, G-clamp, or firmly between your hands for a few seconds. Open up to remove any excess clay, and add any desired texture, then close up again and leave to dry somewhere warm - like an oven, dehydrator, or even on a cup warmer! Carefully remove from the mould once it’s fully dry by prying each corner open a little, then just pop out the mould!
Attach your dry clay bezel to a clay ring with Art Clay Silver Paste or slip, add your 7x5mm teardrop-shaped stone, then fire. The clay will shrink around your stone as it fires, and create a perfect fit! We recommend using CoolSlip or olive oil to lubricate the mould before each use.
Dimensions: 5x7mm internally before firing.
You'll need a 5x7mm pear (teardrop) shaped stone to fit this bezel builder.
